Welcome, Guest. Please login or register.

Login with username, password and session length

 
Advanced search

5061 Posts in 490 Topics- by 184 Members - Latest Member: bushnell@telus.net

May 25, 2013, 10:42:06 PM
Cubicdissection.com ForumsMain ForumGeneral DiscussionOrion - Peter Kaldeway
Pages: [1] 2   Go Down
Print
Author Topic: Orion - Peter Kaldeway  (Read 6357 times)
Johan Heyns
Member

Offline Offline

Posts: 356


Algaande leert men. Ou Toppie


View Profile
« on: June 01, 2008, 04:23:28 AM »

My attempt at angled slots.
Logged

If you don't know where you are going it does not matter which road you take! Lewis Carrol
The only limits to the possibilities in your life tomorrow are your "buts" you use today. -Les Brown
Bring ideas in and treat them royally, for one of them might be a king. - Mark van Doren
Peter Wiltshire
Member

Offline Offline

Posts: 188



View Profile
« Reply #1 on: June 01, 2008, 05:49:40 AM »

Hey Johan,  Nice work!  I look at that puzzle, and can't even begin to imagine how tricky it must be to create.  With all those crazy angles, I knew I should have paid more attention in geometry class  Huh
Logged

When you know how the magic works, you cast the spell that brings a smile of mystification. When you don't know the sleight of hand, the trick of the eye, beware: what you see is what you don't get.
Canuck
Guest
« Reply #2 on: June 01, 2008, 07:27:34 AM »

Very nice!!  Do you have a pic of the jig used to make the cuts?
Logged
Robert Yarger
Member Artist
Member

Offline Offline

Posts: 1055


This is a test of the emergency broadcast system!!


View Profile
« Reply #3 on: June 01, 2008, 10:12:38 AM »

If that is an "attempt" then I wonder what you consider a success.  Nice work.
Logged

Johan Heyns
Member

Offline Offline

Posts: 356


Algaande leert men. Ou Toppie


View Profile
« Reply #4 on: June 01, 2008, 10:29:40 AM »

Below the normal jig that I use when making puzzles. 

When I cut straight blocks, the back part without the angle block is jig.  Note:  the slots were cut out without a dado. Cut by cut and then filed.


Logged

If you don't know where you are going it does not matter which road you take! Lewis Carrol
The only limits to the possibilities in your life tomorrow are your "buts" you use today. -Les Brown
Bring ideas in and treat them royally, for one of them might be a king. - Mark van Doren
Canuck
Guest
« Reply #5 on: June 01, 2008, 10:54:00 AM »

Nice jig!  Those puzzles are time consuming to make have you seen Bill Cutler's designs based on the same theme?  Bill told me one time his 'Hexagonal Porcupine' takes over a thousand cuts to make Shocked
Logged
Johan Heyns
Member

Offline Offline

Posts: 356


Algaande leert men. Ou Toppie


View Profile
« Reply #6 on: June 01, 2008, 11:03:48 AM »

Time consuming is what puzzlemaking is.  24blocks x 3 slots x 6 cuts/slot = effort

Each block has 12 edges x 24 blocks for the bevel = more effort.

I've bought some "exotic wood" yesterday, but haven't scrounged the courage together to start cutting. 

Hopefully my end marks on cutting blocks is now a thing of the past.  I bought an electric tile cutter with a 180mm blade that has this huge 5mm washer for about 1/3 of the diameter on each side to steady the blade, because you cannot allow vibrations when cutting tiles, they will just shatter.  It can only cut 35mm deep, but I don't need more than that for general puzzlemaking where my unit is between 13 - 25mm.
Logged

If you don't know where you are going it does not matter which road you take! Lewis Carrol
The only limits to the possibilities in your life tomorrow are your "buts" you use today. -Les Brown
Bring ideas in and treat them royally, for one of them might be a king. - Mark van Doren
Robert Yarger
Member Artist
Member

Offline Offline

Posts: 1055


This is a test of the emergency broadcast system!!


View Profile
« Reply #7 on: June 01, 2008, 11:33:18 AM »

Nice jig!!

John, to throw salt on an old wound, did you notice that the jig picture did not have any sawdust on it.  Seems like Johan is conspiring with Scott to make your shop look like a pig pen. Smiley
Logged

Johan Heyns
Member

Offline Offline

Posts: 356


Algaande leert men. Ou Toppie


View Profile
« Reply #8 on: June 01, 2008, 11:40:46 AM »

Sorry Robert.  Look at the machine below.  The only reason the thing was clean was because I put it there for the photo.
Logged

If you don't know where you are going it does not matter which road you take! Lewis Carrol
The only limits to the possibilities in your life tomorrow are your "buts" you use today. -Les Brown
Bring ideas in and treat them royally, for one of them might be a king. - Mark van Doren
Scott Peterson
Member Artist
Member

Offline Offline

Posts: 269



View Profile
« Reply #9 on: June 01, 2008, 11:56:10 AM »

Johan - thanks for posting the photo of your jig, and those puzzles look fantastic!  I still think you give yourself too little credit...

With so many angled cuts like that, one small error on each and I can imagine it would be really tough to get it to assemble in the end...

 
Logged
Johan Heyns
Member

Offline Offline

Posts: 356


Algaande leert men. Ou Toppie


View Profile
« Reply #10 on: June 01, 2008, 12:43:57 PM »

Thanks for the compliments gents.

However, if I look at the atavars you are using, my attempts at trying those puzzles were a dismal failure.

If I can make a SPARTLE or a PENNYHEDRON I would me really chuffed with myself.
Logged

If you don't know where you are going it does not matter which road you take! Lewis Carrol
The only limits to the possibilities in your life tomorrow are your "buts" you use today. -Les Brown
Bring ideas in and treat them royally, for one of them might be a king. - Mark van Doren
Canuck
Guest
« Reply #11 on: June 01, 2008, 01:24:46 PM »

The 'Spartle' term was originally coined by Robert when we were exchanging emails regarding the Spalted Myrtle domino's I was making for Robert's Domino Box issue, once I seen Robert use the phrase, I thought it was hilarious so it kind of stuck Grin  The avatar photo is of course my version of Stewart Coffin's Fusion-Confusion design made from Bloodwood and Holly Wink  Have you ever attempted any of Stewart's polyhedral designs?
Logged
Johan Heyns
Member

Offline Offline

Posts: 356


Algaande leert men. Ou Toppie


View Profile
« Reply #12 on: June 01, 2008, 01:33:52 PM »

A few years ago I made a pennyhedron, but not very successfull.  I've bought the CD but haven't had the guts to take it further.
Logged

If you don't know where you are going it does not matter which road you take! Lewis Carrol
The only limits to the possibilities in your life tomorrow are your "buts" you use today. -Les Brown
Bring ideas in and treat them royally, for one of them might be a king. - Mark van Doren
Robert Yarger
Member Artist
Member

Offline Offline

Posts: 1055


This is a test of the emergency broadcast system!!


View Profile
« Reply #13 on: June 01, 2008, 01:51:54 PM »

John,

There is a specific thread used to make fun of poor mushroom and his inability to spell correctly.  Let's stay on topic.
Logged

Canuck
Guest
« Reply #14 on: June 01, 2008, 05:12:16 PM »

Johan, start with the 'easier' puzzles first and work your way through them, even Stewart mentions that's how he made them.  You'll get the most enjoyment that way as well,'It's the journey along the way that's most enjoyable, not the destination' Wink
Logged
Pages: [1] 2   Go Up
Print
Jump to:  

Theme orange-lt created by panic