Welcome, Guest. Please login or register.

Login with username, password and session length

 
Advanced search

5061 Posts in 490 Topics- by 184 Members - Latest Member: bushnell@telus.net

May 26, 2013, 12:39:16 AM
Cubicdissection.com ForumsMain ForumPuzzlemaker ForumShop Techniques, Tips and TricksSelecting the Right Wood for Your Project
Pages: [1]   Go Down
Print
Author Topic: Selecting the Right Wood for Your Project  (Read 1534 times)
Robert Yarger
Member Artist
Member

Offline Offline

Posts: 1055


This is a test of the emergency broadcast system!!


View Profile
« on: April 01, 2008, 09:50:35 AM »

When beginning a project, we frequently select woods based upon their appearance and availability in our area.  However, in many situations, it is equally important to also select a species based upon their woodworking characteristics.  Every species is not appropriate for every application, and in certain situations require special care in order to use.
 
I have made some wood selection blunders in the past, and it would have (for example) been nice to know in advance that bloodwood is supposedly toxic before I chose not to wear a mask.  It would have also been nice to know that holly and ebony (while they produce a nice contrast) do not glue well together.  Eric could have benefited from the fact that bocote tends to shrink/warp before using it for his spline box, and I am sure that Scott would have liked to know that cocobolo can produce allergic reactions before he bought a lot of his stock. 

Also some woods require special attention to saw blades before being milled due to gooey carbon buildup, or splinter easily and require special blades or techniques.  In my opinion, there are no bad woods, only bad choices of application, combinations, and cutting techniques.  This is a place to share our experience with particular woods and techniques for working it. 

I recommend using ?bullet point? format for each wood type to make it easier for us to research later on with the forum search feature.  I will add my own list later today (and it will be a long list as I have much to say), but though I would give you guys a head start.
Logged

Kerry Verne
Member Artist
Member

Offline Offline

Posts: 315


Sup...


View Profile WWW
« Reply #1 on: April 01, 2008, 10:08:22 AM »

  • Color photo resource: http://hobbithouseinc.com/personal/woodpics/
  • The toxic wood list: http://www.mimf.com/archives/toxic.htm  Exposure can lead to cumulative effects. It may itch now, but send you to the hospital after longer exposure. The dust that will do you in is the fine stuff you DC isn't collecting. Invest in a 1micron bag for your collector, or at least a 5micron for now.
  • Padauk dust is used as a natural dye, and will do the same to your clothes.
  • Purpleheart, Zebrawood, and Teak have a high silica content, and will dull blades faster than other woods. Silicosis from breathing silica is also possible, and not fun.
Logged

"Welcome to the internets... where the men are men, the women are men and the kids are FBI agents."
Pages: [1]   Go Up
Print
Jump to:  

Theme orange-lt created by panic